Microsys Technologies header
 
 

Calibration

All Microsys test systems are calibrated either before leaving the factory or on-site following installation.

Calibrations are typically valid for one year and must be renewed on an annual basis. You should receive notification that your system is due for calibration renewal approximately 30 to 60 days prior to expiration.

A system calibration performed by Microsys personnel ensures your system is performing within specified operating limits and in proper working condition. It is usually a requirement under ISO-9000 and QS-9000 that your test system be calibrated annually.

Need help?
Contact Microsys customer service to arrange for a calibration verification of your test system, to ask for cost information or to check the date of expiry of your existing calibration.

Missing calibration reports or certificates
Missing calibration reports or calibration certificates can be replaced free of charge by contacting customer service.

 




Printer friendly version
 
spacer

Head Office: 3710 Nashua Drive, Mississauga ON L4V 1M5, Canada
Telephone: +1 (905) 678-3288 | Fax: +1 (905) 678-3319


© Microsys Technologies Inc. All rights reserved.